Grams Engineering Follower Kit- Tanfoglio/EAA/Caspian 40SW

Grams Follower Kit- Tanfoglio/EAA/Caspian

Product ID: FKK40-11

This "Follower Kit T" is pre-tuned and requires no modifications for proper 

feeding function in a magazine tube of correct tolerances and no spacer 

plate installed inside the back of the mag tube. 

The follower is designed for slide-lock function, but due to tolerance stacking, material from the slide-lock paw, follower, or both may need to be removed for proper function. Tuning of the mag tube may be required if the desired reliability or round count is not obtained. 

Do not hesitate to contact a qualified 

gun-smith or call directly to www.GramsEngineering.com if assistance is needed. 

• FKK38-11 (Follower Kit - for EAA/Tanfoglio 38sup mag, manufactured by Mec-Gar (tube marked K38 or 38-LF). Designed for mag OAL that measure up to 145mm long (kit includes Grams Format Follower (K38) and 11 coil spring).) 

• FKK40-11 (Follower Kit - for EAA/Tanfoglio 40sw mag, manufactured by Mec-Gar (tube marked K40 or 40-LF, spacer plate installed). Designed for mag OAL that measure up to 145mm long (kit includes Grams Format Follower (K40) and 11 coil spring).) 

• FKK9-11 (Follower Kit - for EAA/Tanfoglio 9x19 mag, manufactured by Mec-Gar (tube marked K9 or 9-LF, spacer plate installed). Designed for mag OAL that measure up to 145mm long (kit includes Grams Format Follower (K9) and 11 coil spring).) 

• FKT-11(Follower Kit - for Tanfoglio (Gen 1, large frame, marked with a triangle T) & Caspian (Gen 2) mag, that measure up to 145mm long, (includes Grams Format Follower (T) & 11 coil spring).) 

• FKT-13(Follower Kit - for Tanfoglio (Gen 1, large frame, marked with a triangle T) & Caspia